Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replace Window Regulator Motor on BMW 3 Series

Model: BMW Serie 3 E46 - Years 1998-2006
Part: Power window motor

Is the window regulator not working on your BMW 3 Series? Remove the door panel cover to access the interior. Disconnect the battery terminals for safety. Use a pry tool to remove the plastic cover, then unscrew the screws located above the panel. Detach the door panel, disconnect the window regulator and speaker connectors. Now that you have removed the door panel, peel off the adhesive cover. Identify the motor to be replaced. Replace the part and reassemble everything in reverse order. Install all the cover pieces after securing the window regulator motor. Test the operation of the window regulator motor.

Updated on 28 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Window Regulator Motor of the BMW 3 Series
How to Reset the Window Regulator Motor of the BMW 3 Series
BMW Serie 3 (1998-2006 / E46) Today, we will see how to reset the window regulator motor of the BMW 3 Series model E46. To perform this procedure, turn on the ignition and press t…
How to reset the window regulator motor of the BMW Series 3.
How to reset the window regulator motor of the BMW Series 3.
BMW Serie 3 (1998-2006 / E46) Today's instructions will show us how to reset the window regulator motor of the BMW Series 3. First, let's get inside the vehicle and start by turni…
Removal of the Window Regulator Motor (Part 4)
Removal of the Window Regulator Motor (Part 4)
BMW Serie 3 (1998-2006 / E46) Using a small pry bar, disengage the clips that secure the weatherstrip in the glass passage slot and remove it. Remove the glass from its housing by…

Other guides you may be interested in

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos