Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of the dashboard speaker of the BMW 3 Series

Model: BMW Serie 3 E91, E90, E92 - Years 2005-2013
Part: Speaker

The steps outlined in this guide will show us how to disassemble and replace the dashboard speaker of the BMW 3 Series. First, we get into the car and start by removing the speaker grille located at the top of the dashboard; then we unscrew the speaker mounting screws found on the sides, finally disconnecting the electrical connector to remove it, as shown in the video. At this point, we replace the speaker with the new one, making the connection and checking its operation; finally, we reassemble the plastic grille on the dashboard!

Posted on 25 April 2025 by ScegliAuto

Video tutorial

Related tutorials

How to know the fuse diagram of a BMW 3 Series
How to know the fuse diagram of a BMW 3 Series
BMW Serie 3 (2012-2019 / F30, F31) The fuse box of a BMW 3 Series car can be located inside the vehicle's cabin and contains fuses related to: windshield wiper motor, windshield washer…
Replacing the Low Beam Headlight Bulb on a BMW 3 Series
Replacing the Low Beam Headlight Bulb on a BMW 3 Series
BMW Serie 3 (2012-2019 / F30, F31) Here are the instructions to remove and replace the low beam headlight bulb on a BMW 3 Series. To access the low beam bulb, remove the plastic cover …
Where are the fuses located in the BMW 3 Series?
Where are the fuses located in the BMW 3 Series?
BMW Serie 3 (2012-2019 / F30, F31) The fuses in the BMW 3 Series are located inside the designated fuse boxes within the vehicle. For the BMW 3 Series, open the trunk and lift the carp…

Other guides you may be interested in

How to Open the Bonnet on the Lancia Y

To open the bonnet on this vehicle, follow these simple instructions: first, open the driver's door and locate the lever positioned just below the dashboard, marked with an image of the vehicle with the bonnet open. Pull this lever towards you until you hear a "click" indicating the bonnet is released. Next, exit the cabin and stand in front of the bonnet to disengage the safety catch and complete the opening. To do this, slightly lift the bonnet, locate the yellow lever underneath, and pull it to the left to fully release and open the bonnet.

Watch the video!


by ScegliAuto

More videos