Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the front speakers of the BMW 3 Series

Model: BMW Serie 3 E91, E90, E92 - Years 2005-2013
Part: Speaker

The information provided in this guide will show us how to disassemble and replace the front door speakers of the BMW 3 Series. First, we open the front door of the car and start removing the door panel, unscrewing the fixing screws and disconnecting the electrical connector; then we unscrew the speaker screws, disconnecting the electrical connector to remove it, as shown in the video. At this point, we replace and install the new speaker, compatible and with the same power; finally, we reassemble the door panel!

Posted on 25 July 2025 by ScegliAuto

This video is currently unavailable

Related tutorials

Replacement of the speakers of the BMW 3 Series
Replacement of the speakers of the BMW 3 Series
BMW Serie 3 (1998-2006 / E46) Today's guide will show us how to disassemble and replace all the speakers of the BMW 3 Series, following the instructions below. First, we get on bo…
How to replace the front speakers in the BMW 3 Series?
How to replace the front speakers in the BMW 3 Series?
BMW Serie 3 (2005-2013 / E91, E90, E92) In this tutorial, you will see how to replace the front speakers in the BMW 3 Series, a very simple and quick operation. First, make sure the key is …
Replacing Door Speakers in BMW 3 Series
BMW Serie 3 (1998-2006 / E46) Are the speakers in your BMW 3 Series damaged? Let's see how to remove them. You need to take off the door panel to access the speaker. Use a trim to…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos