Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the front speakers in the BMW 3 Series?

Model: BMW Serie 3 E91, E90, E92 - Years 2005-2013
Part: Speaker

In this tutorial, you will see how to replace the front speakers in the BMW 3 Series, a very simple and quick operation. First, make sure the key is not inserted, then open the door in question and unclip the long central trim starting from the inside. Next, remove the 4 Torx screws that are now exposed, pry along the perimeter of the panel, and separate it from the door. Finally, disconnect the various connectors, remove the screws securing the speaker, and proceed with its replacement. To reassemble everything, simply follow the reverse procedure.

Updated on 24 August 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacement of the speakers of the BMW 3 Series
Replacement of the speakers of the BMW 3 Series
BMW Serie 3 (1998-2006 / E46) Today's guide will show us how to disassemble and replace all the speakers of the BMW 3 Series, following the instructions below. First, we get on bo…
How to replace the front speakers of the BMW 3 Series
BMW Serie 3 (2005-2013 / E91, E90, E92) The information provided in this guide will show us how to disassemble and replace the front door speakers of the BMW 3 Series. First, we open the fr…
How to Replace the Front Door Speaker of a BMW 3 Series
How to Replace the Front Door Speaker of a BMW 3 Series
BMW Serie 3 (2005-2013 / E91, E90, E92) Before you can start, open the front door of your BMW 3 Series. Begin by removing the door panel; disengage and remove the inserts, then unscrew the …

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos