Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Rear Door of the BMW 3 Series

Model: BMW Serie 3 F30, F31 - Years 2012-2019
Part: Car door

This guide will show you the procedure for removing and replacing the rear door of the BMW 3 Series. First, open the rear door of the vehicle and start by removing the door panel, unscrewing the mounting screws and disconnecting the power connector for the window switch. Next, unscrew the hinge pin screws and disconnect the wiring harness to remove the entire door, as shown in the video. At this point, if necessary, replace the door with a new one, applying the reverse procedure for reassembly!

Updated on 11 September 2026 by ScegliAuto

Video tutorial

Related tutorials

Removing the Rear Side Window of the BMW 3 Series
Removing the Rear Side Window of the BMW 3 Series
BMW Serie 3 (2005-2013 / E91, E90, E92) This guide briefly outlines the steps necessary to remove and replace the rear side window of the BMW 3 Series. First, open the rear door and begin r…
How to Remove the Rear Panel of a BMW 3 Series
How to Remove the Rear Panel of a BMW 3 Series
BMW Serie 3 (2005-2013 / E91, E90, E92) Remove the rear door panel (left side) on a BMW 3 Series: disconnect the battery terminals, use a screwdriver to remove the screws located in the upp…
How to Replace the Fixed Glass of the Rear Door on a BMW 3 Series?
How to Replace the Fixed Glass of the Rear Door on a BMW 3 Series?
BMW Serie 3 (2005-2013 / E91, E90, E92) To replace the fixed glass of the rear door on a BMW 3 Series, first remove the inner door panel. You can remove the panel by loosening the screws lo…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos