Do it yourself
| ||||
|
BMW Serie 3 - Video tutorial
Model: BMW Serie 3
E92, E90, E91
- Years 2005-2013 In this guide, we will see the instructions that will allow us to disassemble and replace the rear lights of the trunk door of the BMW 3 Series. First of all, we open the rear door and start to disassemble and remove the inner plastic panel; then we use a socket wrench to unscrew the nuts, removing the light from the outside, as shown in the video. At this point, we disconnect the electrical connector, replacing the bulbs or the entire light if necessary; all that's left is to reassemble the rear light, applying the reverse process of disassembly!
Posted on 13 April 2024 by ScegliAuto
Other guides that may interest you |
Frequently Asked QuestionsReplace the steering angle sensor on the Volkswagen Golf 5When the steering angle sensor malfunction warning light comes on, it may need to be replaced as follows: first remove the steering wheel and the lower steering wheel guard by removing the three fixing screws. The steering sensor is located just below the steering column. To release it you need to have a small screwdriver and insert it into the hole on the front, push the screwdriver all the way down until the clips at the bottom are released. Next, pull down on the back of the card containing the sensor and disengage it from the steering column. At that point take the new card and reposition it, after which proceed backwards to reassemble the various components. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.044
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |