Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Rear Seats of the BMW 3 Series

Model: BMW Serie 3 F31, F30 - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Seat

See other generations:
Video tutorial

Follow these main instructions to remove and replace the rear seats of the BMW 3 Series. First, open the rear doors and lift the rear bench seat upward to detach it from the supports and remove it. Next, unscrew the fastening bolts of the seatbacks using a screwdriver or Torx wrench, as shown in the video.

Once all the rear seats are removed from the vehicle, you can proceed with cleaning or replacement. Finally, reassemble everything by applying the reverse procedure!


Updated on 1 June 2026 by ScegliAuto


Related tutorials

How to Lower the Rear Seats of the BMW 3 Series
How to Lower the Rear Seats of the BMW 3 Series
BMW Serie 3 (2005-2013 / E92, E90, E91) This guide briefly outlines the steps to lower the rear seats of the BMW 3 Series, increasing the trunk space, following the instructions below. Firs…
How to Remove the Rear Seats of the BMW 3 Series
How to Remove the Rear Seats of the BMW 3 Series
BMW Serie 3 (2012-2019 / F31, F30) Today, let's go over the instructions for removing the rear seats and bench of the BMW 3 Series. First, open the rear doors and start by removing the…
How to Lower the Rear Seats of a BMW 3 Series
How to Lower the Rear Seats of a BMW 3 Series
BMW Serie 3 (2012-2019 / F31, F30) On some BMW 3 Series models, the mechanism to lower the rear seats is not located at the top of the seatback, but in the trunk. Open the rear hatch a…

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos