Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Rear Seat of the BMW 3 Series

Model: BMW Serie 3 F31, F30 - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Rear bench seat

See other generations:
Video tutorial

Follow these instructions to disassemble and remove the rear seat of the BMW 3 Series. First, open the rear doors of the vehicle and pull the rear seat upward firmly to detach it from the lower clips; then remove the seat from the cabin as shown in the video.

At this point, clean or replace the rear seat, disassembling the seat backs if necessary by unscrewing all the screws at their base; finally, reinstall the rear seat!


Posted on 2 April 2026 by ScegliAuto


Related tutorials

How to Remove the Rear Seats of the BMW 3 Series
How to Remove the Rear Seats of the BMW 3 Series
BMW Serie 3 (2012-2019 / F31, F30) Today, let's go over the instructions for removing the rear seats and bench of the BMW 3 Series. First, open the rear doors and start by removing the…
How to Remove the Rear Seats of the BMW 3 Series
How to Remove the Rear Seats of the BMW 3 Series
BMW Serie 3 (2012-2019 / F31, F30) Follow these main instructions to remove and replace the rear seats of the BMW 3 Series. First, open the rear doors and lift the rear bench seat upwa…
How to Remove the Rear Bumper of the BMW 3 Series
How to Remove the Rear Bumper of the BMW 3 Series
BMW Serie 3 (1998-2006 / E46) Let's briefly review the instructions that will allow you to remove and replace the rear bumper of the BMW 3 Series in simple steps. First, unscrew t…

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos