Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Rear Bumper of the BMW 3 Series

Model: BMW Serie 3 E46 - Years 1998-2006
Part: Rear bumper

Let's briefly review the instructions that will allow you to remove and replace the rear bumper of the BMW 3 Series in simple steps. First, unscrew the mounting screws located on both sides of the wheel wells using an 8 mm wrench and remove all the plastic clips; then, remove the plastic cover of the bumper and unscrew the torx screws located underneath, as shown in the video. At this point, pry on the side to gently disengage and remove the rear bumper, applying the reverse procedure for reassembly!

Updated on 7 September 2026 by ScegliAuto

Video tutorial

Related tutorials

How to remove the rear bumper of the BMW 3 Series
How to remove the rear bumper of the BMW 3 Series
BMW Serie 3 (2012-2019 / F30, F31) In this brief guide we will see the instructions that will allow us to disassemble and replace the rear bumper of the BMW 3 Series. First of all, we …
How to Remove the Rear Bumper of the BMW 3 Series
How to Remove the Rear Bumper of the BMW 3 Series
BMW Serie 3 (1998-2006 / E46) Below are the main instructions on how to remove and replace the rear bumper of the BMW 3 Series. First, open the rear hatch of the vehicle and start…
Remove the Rear Bumper of a BMW 3 Series
Remove the Rear Bumper of a BMW 3 Series
BMW Serie 3 (2005-2013 / E91, E90, E92) Remove the rear bumper of a BMW 3 Series, here’s how to proceed: Unscrew the mounting screws (with a screwdriver or cordless drill) of the rear light…

Other guides you may be interested in

How to Reset the Central Locking of the Volkswagen Golf 4?

If the central locking system of the Volkswagen Golf 4 is not working, it is likely necessary to reset the system: to do this, open the driver's door and detach the side panel of the dashboard next to the steering wheel. Under this panel, you will find the fuses, including the one for the central locking, which is indicated in the manual as number 14. To reset the system, remove this fuse from its housing, then reinsert it or replace it with a new one of the same amperage: this will reset the central locking system.

Watch the video!


by ScegliAuto

More videos