|
Do it yourself
| |||
| ||||
How to Remove the Rear Bumper of the BMW 3 Series
Model: BMW Serie 3
F31, F30
- Years:
2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Video tutorial
In this brief guide, you will find instructions to remove and replace the rear bumper of the BMW 3 Series. First, open the trunk and start unscrewing and removing all the clips and screws located on both sides of the rear wheel wells. Then, remove the additional screws found on the upper and lower parts of the bumper, as shown in the video. At this point, pry on the sides to detach and gently remove the bumper, replacing it with the new one; install and secure the bumper properly!
Updated on 11 October 2026 by ScegliAuto
Related tutorials
BMW Serie 3
(1998-2006 /
E46)
Let's briefly review the instructions that will allow you to remove and replace the rear bumper of the BMW 3 Series in simple steps. First, unscrew t…
BMW Serie 3
(1998-2006 /
E46)
In this tutorial, you will see how to remove the rear bumper on a BMW 3 Series E46, a very simple operation. Start by removing the bolt and the plast…
BMW Serie 3
(2005-2013 /
E92, E90, E91)
Remove the rear bumper of a BMW 3 Series, here’s how to proceed: Unscrew the mounting screws (with a screwdriver or cordless drill) of the rear light…
Other guides you may be interested in
|
How to Reset the AdBlue Warning Light on a Peugeot Boxer
To reset the AdBlue system on a 2018 Peugeot Boxer, follow these steps: Start the engine and ensure the vehicle is parked in a well-ventilated area. Locate the "MENU" button on the dashboard or steering wheel controls. Press and hold the "MENU" button until the menu options appear on the display. Use the arrow buttons or scroll wheel to access the "Vehicle Settings" or "Settings" menu. Select the "AdBlue" or "AdBlue System" option. Look for the "Recharge" or "Reset" option in the AdBlue menu. Once you find the reset option, select it and confirm your choice when prompted. The system will be reset, and a confirmation message may appear on the display. Turn off the engine and wait a few seconds. Restart the engine and check that the AdBlue system has been reset. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.033
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |
