Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Rear Bumper of the BMW 3 Series

Model: BMW Serie 3 E46 - Years 1998-2006
Part: Rear bumper

Below are the main instructions on how to remove and replace the rear bumper of the BMW 3 Series. First, open the rear hatch of the vehicle and start unscrewing all the mounting screws located above and below the bumper; unscrew the additional screws found on both sides of the rear wheel wells, as shown in the video. At this point, gently detach the bumper from the sides until it is completely removed, replacing it with the new one if necessary; securely attach it to the body using all the original screws and clips, following the video tutorial to the end!

Posted on 4 March 2026 by ScegliAuto

Video tutorial

Related tutorials

Remove the Rear Bumper of a BMW 3 Series
Remove the Rear Bumper of a BMW 3 Series
BMW Serie 3 (2005-2013 / E91, E90, E92) Remove the rear bumper of a BMW 3 Series, here’s how to proceed: Unscrew the mounting screws (with a screwdriver or cordless drill) of the rear light…
Replacing the Rear Bumper on a BMW 3 Series
Replacing the Rear Bumper on a BMW 3 Series
BMW Serie 3 (1990-2001 / E36) Want to replace the rear bumper on your BMW 3 Series? Let's see how to remove it from the body. Remove the screws located at the bottom of the bumper…
How to Replace the Diffuser in the BMW 3 Series?
How to Replace the Diffuser in the BMW 3 Series?
BMW Serie 3 (2012-2019 / F30, F31) In this tutorial, see how to replace the diffuser in the BMW 3 Series F30, which is the decorative element located at the bottom of the rear bumper. …

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos