Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to disassemble the rear taillight of a BMW 328i xDrive

Model: BMW Serie 3 E92, E90, E91 - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: Tail light

See other generations:
Video tutorial

Thanks to this useful video tutorial, we are shown how to disassemble the rear taillight of a BMW 328i xDrive, a specific model produced from 2009 to 2013. So let's start the operation by opening the rear trunk of our car and removing the small upholstery panel covering the back of the taillight as shown in the video, then we proceed to disconnect the light connector and use an 8mm wrench to unscrew the three fixing screws holding the taillight in place.

Once this is done, we can remove the old taillight from the vehicle, then remove the bulb fixture from the back of the taillight to mount it on a new taillight and then reassemble everything following the reverse procedure.


Posted on 17 January 2025 by ScegliAuto


Related tutorials

Replacement of the front coolant pipe of the BMW 3 Series 328i.
Replacement of the front coolant pipe of the BMW 3 Series 328i.
BMW Serie 3 (2005-2013 / E92, E90, E91) In a few simple steps, we will see how to disassemble and replace the front coolant tube of the BMW 3 Series 328i engine. First, open the hood of the…
How to replace the oil radiator of the BMW 3 Series 328i
How to replace the oil radiator of the BMW 3 Series 328i
BMW Serie 3 (2012-2019 / F31, F30) Today we will discover the instructions that will allow us to disassemble and replace the oil radiator of the BMW 3 Series 328i. First of all, lift t…
Replacement of the windshield washer pump of the BMW 3 Series 328I
Replacement of the windshield washer pump of the BMW 3 Series 328I
BMW Serie 3 (1998-2006 / E46) The following steps will allow us to disassemble and replace the windshield washer pump of the BMW 3 Series 328I. First, we open the hood of the car …

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos