Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Rear Light Malfunction Indicator on a BMW (Without a Scanner)

Model: BMW X5 - Years: 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006
Part: Warning light – error code

See other generations:
Video tutorial

Before resetting the rear light indicator, address the physical issue by checking and replacing the bulbs, or inspecting the sockets and contacts or fuses. If everything is in order, the system needs a reset shock: go to the trunk, locate the electrical connector for the rear light assembly, disconnect it and wait about ten seconds, then reconnect it securely.

Restart the car and check. If it doesn't work, reset from the battery by disconnecting the negative terminal for about 15 minutes.

This resets many control modules, but you will need to re-enter several personal settings afterward.


Posted on 20 October 2026 by ScegliAuto


Related tutorials

How to Reset the Parking Brake on a BMW X5?
How to Reset the Parking Brake on a BMW X5?
BMW X5 (2007-2013 / E70) To reset the parking brake on a BMW X5, connect a diagnostic tool to the vehicle's OBD port: on this model, the port is located on the lower left sid…
How to disassemble the interior light fixture of the BMW X5
How to disassemble the interior light fixture of the BMW X5
BMW X5 (2007-2013 / E70) Today we will discover the instructions that will allow us to disassemble and replace the interior light fixture and its bulbs of the BMW X5. First, …
Where are the fuses located in the BMW X5?
Where are the fuses located in the BMW X5?
BMW X5 (2013-2018 / F15) On board the BMW X5, it will be possible to notice that the fuses are located inside the appropriate fuse boxes that are installed on the vehicle: in…

    Frequently Asked Questions

    • X5 2013-2018 - What to do if the 4x4 warning light comes on in the BMW X5? Read answer

Replacing the Gear Knob on the Mercedes Sprinter MK 2

With regular use, the gear knob on the Mercedes Sprinter may show signs of wear that necessitate its replacement. To carry out the replacement, sit in the driver's seat, and using a pair of pliers, rotate the knob left and right to unlock it. Grip the knob and gently pull it off while ensuring that the spring mounted on the lever does not get lost. Take the new knob, align it with the gear pattern, tap it on gently, and finish inserting it using a rubber mallet.

Watch the video!


by ScegliAuto

More videos