Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Emblem on the Tailgate of a BMW X5

Model: BMW X5 E53 - Years 1999-2006
Part: Manufacturer emblem

In this video, learn how to remove and reinstall the emblem on the tailgate of a BMW X5. Get some plastic trim tools to avoid scratches, then pry between the logo and the plastic trim above the tailgate until it detaches from the body. Once the piece is detached, remove it from the housing and prepare to install the new logo: clean the base where you will stick the logo; position the emblem perfectly on the plastic logo holder, press down with your hands until the emblem adheres securely to the base. Finally, double-check that everything is installed perfectly.

Updated on 14 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the rear manufacturer emblem of the BMW X5
How to replace the rear manufacturer emblem of the BMW X5
BMW X5 (2007-2013 / E70) Today we discover the instructions that allow us to disassemble and replace the rear manufacturer emblem of the BMW X5. First of all, let's move to t…
How to disassemble the BMW X5 rear view camera
How to disassemble the BMW X5 rear view camera
BMW X5 (2007-2013 / E70) In this guide, we will see the main instructions that will allow us to disassemble and replace the rear camera of the BMW X5. First of all, we open t…
How to Remove the Handle on BMW X5
How to Remove the Handle on BMW X5
BMW X5 (1999-2006 / E53) How to remove and replace the door handle on a BMW X5? Use a screwdriver to remove the screws located in the door as shown in the video. Then, discon…

Removing the Timing Belt on a Suzuki Vitara

In this video, see the removal and replacement of the timing belt and water pump on a Suzuki Vitara. Open the bonnet and lift it, securing it in place. Use a socket wrench to remove the cooling radiator along with the associated hoses. Disconnect the power wiring using pliers, and remove the plastic undertray with a screwdriver. Use a spanner to loosen the tensioner pulley and slide the belt off its seat. Use a socket wrench to unscrew the tensioner pulley bolt, and remove the water pump as shown in the video. Fit the new water pump, the tensioner, and the belt itself, tightening everything with the socket wrench. Finally, reinstall the radiator with the securing bolts.

Watch the video!


by ScegliAuto

More videos