Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to install splash guards on a BMW X5

Model: BMW X5 G05, G18 - Years 2019-2026
Part: Body

Let's see how to install mud flaps on our BMW X5 to protect the wheel arches from pebbles and dirt: first, let's get the mud flaps, for example on Amazon with the code B0BP1TMKFJ at the price of 14.97 euros for a kit of 4 pieces, with free shipping. Remove the 10 mm screw hidden behind an aesthetic panel on the front fender; reattach the original screw by passing it through the large hole of the mud flap, and tighten it by hand. Insert the lip of the mud flap into the inner edge of the wheel arch, and secure it with the two self-tapping screws included in the kit (the longer one goes at the top and the shorter one at the bottom). For the rear, remove the 10 mm screw located at the bottom of the wheel arch, insert the mud flap, reinsert the original screw into its main hole, align the component, and secure it permanently.

Posted on 30 December 2025 by ScegliAuto

Video tutorial

Related tutorials

How to disassemble and replace the car radio of the BMW X5
How to disassemble and replace the car radio of the BMW X5
BMW X5 (1999-2006 / E53) Today we will see the instructions that will allow us to disassemble and replace the standard car radio with a new multimedia system on the BMW X5. F…
How do you replace the steering angle sensor of the BMW 3 Series?
How do you replace the steering angle sensor of the BMW 3 Series?
BMW X5 (2007-2013 / E70) The replacement of the steering angle sensor on the BMW X5 can be carried out by completely disassembling the steering column: to do this, it will be…
How to Remove the Center Dashboard Panel of the BMW X5?
How to Remove the Center Dashboard Panel of the BMW X5?
BMW X5 (2007-2013 / E70) To remove the center dashboard panel of the BMW X5, open the glove compartment located on the passenger side. This allows you to pull out the air ven…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos