Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Instructions for Removing the Front Fender

Model: BMW X5 E53 - Years: 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006
Part: Body

See other generations:
Video tutorial

To remove the front fender, first remove the door to access some of the mounting bolts; after removing the door, proceed to the mounting bolts of the fender along the hood closing line, including those securing the hood hinge. Continue with the bolts along the front pillar of the door and then remove the plastic trim along the edge of the fender, which is secured with plastic push clips: push the center pin of the clip to extract it. Also, remove the wheel well liner and complete the removal of the fender mounting bolts to fully detach it.


Updated on 17 February 2026 by ScegliAuto


Related tutorials

Instructions for Removing the Front Fender
Instructions for Removing the Front Fender
BMW X5 (1999-2006 / E53) To remove the front fender, you must first remove the door and the hood to access the various mounting pins. These pins are located along the inner e…
Instructions for Removing the Alternator
Instructions for Removing the Alternator
BMW X5 (1999-2006 / E53) Before removing the auxiliary belt, it is suggested to take a photo or note the routing of the belt around the various pulleys. Once the auxiliary be…
Replacing the Headlight Washer Nozzle on the BMW X5
Replacing the Headlight Washer Nozzle on the BMW X5
BMW X5 (1999-2006 / E53) In this video tutorial, you will learn how to remove and replace the headlight washer nozzle on the BMW X5, following the instructions below. To acce…

How to lower the rear seats in the Peugeot 206?

In this tutorial, you will see how to lower the rear seats in the Peugeot 206, a very simple and quick operation, for example, if you need more space in the boot. First, open both the doors and the tailgate, then unclip the seat base and position it vertically. Next, remove the horizontal partition, locate the release levers at the ends of both seatbacks, and, by operating them, lower the seatbacks. To reassemble everything, simply follow the reverse procedure.

Watch the video!


by ScegliAuto

More videos