Do it yourself
Frequently asked questions about cars and motorcycles

How to remove the rear bumper of the BMW X5

Model: BMW X5 F15 - Years 2013-2018
Part: Rear bumper

Today's video will show us the steps on how to disassemble and replace the rear bumper of the BMW X5, following the instructions below. First, we open the rear trunk door and start disassembling and removing the rear lights, unscrewing the screw found on the back and disconnecting the electrical connector of the bulbs; then we unscrew all the bumper screws, located above and below it as well as on both sides of the rear wheel arches, as shown in the video. At this point, we remove and replace the bumper with the new one if necessary!

Posted on 20 June 2024 by ScegliAuto

Video tutorial

Related tutorials

BMW X5 (1999-2006 / E53) In this guide, we will see the process of disassembling and replacing the front bumper of the BMW X5. First of all, let's move to the front of the ve…
BMW X5 (2013-2018 / F15) In this video, see how to remove the grille from the front bumper of a BMW X5. Prepare to take off the plastic grille frame from both sides of the bu…
BMW X5 (2019-2026 / G05, G18) In just a few simple steps, we will go through the process of removing and replacing the rear wiper blade on the BMW X5. First, move to the back of t…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos