Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to disassemble the front bumper of the BMW X5

Model: BMW X5 E53 - Years 1999-2006
Part: Front bumper

In this guide, we will see the process of disassembling and replacing the front bumper of the BMW X5. First of all, let's move to the front of the vehicle and start by opening the hood; unscrew all the fixing screws located on the top and bottom of the bumper, also located near the fog lights and on both sides of the front wheel arches, as shown in the video. At this point, gently release the bumper on the sides until it is completely removed, replacing it if necessary with a new one; then reassemble the front bumper, applying the reverse process!

Posted on 12 June 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Grille from the Front Bumper of a BMW X5
How to Remove the Grille from the Front Bumper of a BMW X5
BMW X5 (2013-2018 / F15) In this video, see how to remove the grille from the front bumper of a BMW X5. Prepare to take off the plastic grille frame from both sides of the bu…
Removing the Front Bumper Cover
Removing the Front Bumper Cover
BMW X5 (1999-2006 / E53) To remove the front bumper, place the car on a lift and raise it to a comfortable working height. Remove the two front wheels. To take off the bumper…
How to remove the rear bumper of the BMW X5
How to remove the rear bumper of the BMW X5
BMW X5 (2013-2018 / F15) Today's video will show us the steps on how to disassemble and replace the rear bumper of the BMW X5, following the instructions below. First, we ope…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos