Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Door on BMW 5 Series

Model: BMW Serie 5 F11, F10 - Years 2010-2017
Part: Door trim panel

Remove the door cover panel on a BMW 5 Series if it is broken. Start by removing the plastic trim above the panel to access the screws. Use a screwdriver to remove the screws located in the holes where you removed the covers. Remove all screws on the door panel and take off the plastic under the door opening lever. Pull the panel away from the door and disconnect the wiring harness and the opening cable. Perform the desired maintenance inside the door. Then reconnect the electrical connectors and install the new door cover panel along with the screws and plastic parts.

Updated on 19 March 2026 by ScegliAuto

This video is currently unavailable

Related tutorials

How to Remove the Side Glass from the BMW 5 Series Door
How to Remove the Side Glass from the BMW 5 Series Door
BMW Serie 5 (1988-1995 / E34) In today's video, you will see the steps to remove and replace the side glass from the BMW 5 Series door, following the instructions below. First, op…
Remove the Door Panel on BMW 5 Series
Remove the Door Panel on BMW 5 Series
BMW Serie 5 (2010-2017 / F11, F10) Replacing the cover panel on a BMW 5 Series? Let's see how to remove it. Remove the trim piece at the top of the panel (as shown in the video), and u…
How to Install or Replace Welcome Light on BMW 3 Series - 4 Series - 5 Series
How to Install or Replace Welcome Light on BMW 3 Series - 4 Series - 5 Series
BMW Serie 5 (2010-2017 / F11, F10) In this tutorial video, you will see how to install or replace the welcome light bulb found on the door of a BMW 5 Series, but also on the 3 Series a…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos