Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Disassembly of the rear door panel of the BMW 5 Series

Model: BMW Serie 5 E61, E60 - Years 2003-2010
Part: Door trim panel

Today we will discover the instructions that will allow us to disassemble and replace the rear door panel of the BMW 5 Series. First of all, we open the rear door of the car and start removing all the plastic clips and screws located inside the holes on the sides of the door panel; then we lever to detach it and remove it, disconnecting the electrical connector of the window lift button and the handle cable, as shown in the video. At this point it will be possible to access the internal components of the door, finally reassembling the door panel!

Posted on 27 October 2024 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Door Panel on a BMW 5 Series
How to Remove the Door Panel on a BMW 5 Series
BMW Serie 5 (2010-2017 / F11, F10) How do you remove the rear door panel on a BMW 5 Series? Let's see how to proceed in this video. Before starting the disassembly, disconnect the batt…
How to Remove the Door Panel of a BMW 5 Series
How to Remove the Door Panel of a BMW 5 Series
BMW Serie 5 (2010-2017 / F11, F10) Before you start, open the door of your BMW 5 Series. Begin by disengaging the side airbag clip. Next, unscrew the screws that secure the door panel.…
How to remove the rear door panel of the BMW 5 Series
How to remove the rear door panel of the BMW 5 Series
BMW Serie 5 (2010-2017 / F11, F10) Today we will see the process of disassembling the rear door panel of the BMW 5 Series. First, we open the rear door of the car and start by removing…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos