Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Disassembly of the BMW 5 Series Twin Power N20 timing chain

Model: BMW Serie 5 F11, F10 - Years 2010-2017
Part: Timing belt

We see in this video the instructions on how to disassemble and replace the timing chain on a BMW 5 Series Twin Power, but also on other models with N20 engine. First we open the bonnet of our car and we go to remove the engine protection; we also remove the lower one, unscrewing all the fixing screws. At this point we remove the intake sleeve and disconnect the various pipes that we find near the timing cover, as shown in the video; now we remove all the elements that we will need to access the chain, removing and replacing it. Follow the instructions in the tutorial to the end!

Posted on 8 January 2021 by ScegliAuto

Video tutorial

Related tutorials

BMW 5 Series timing chain disassembly instructions
BMW 5 Series timing chain disassembly instructions
BMW Serie 5 (2010-2017 / F11, F10) Today we will see how to disassemble and, therefore, replace the timing chain of a BMW 5 Series: we will mainly go to see the main steps. First of al…
When and how to change the distribution chain of the BMW 5 Series.
When and how to change the distribution chain of the BMW 5 Series.
BMW Serie 5 (2003-2010 / E61, E60) The replacement of the distribution chain on the BMW 5 Series, with a gasoline engine, is performed after reaching 250,000 kilometers or ten years; h…
Replacing the spark plugs on the BMW 5 Series F10 2.0 Twin Turbo
Replacing the spark plugs on the BMW 5 Series F10 2.0 Twin Turbo
BMW Serie 5 (2010-2017 / F11, F10) Today we will see, in this video tutorial, how to remove and replace the engine spark plugs on the BMW 5 Series F10, with 2.0 Twin Turbo engine (code…

How to Remove the Spark Plugs on a Subaru Forester

In this video, learn how to remove the spark plugs on a Subaru Forester. Pull the lever to open the engine compartment and lift the front bonnet, securing it. Remove the soundproofing panel covering the cylinder head, the air filter kit (if necessary), then disconnect the coils by hand, unscrew the spark plugs with your socket wrench, and pull them out of the cylinder head. Take the new spark plugs and guide them with the extension of the socket wrench into the cylinder head, tighten them properly, secure the ignition coils, refit the previously removed panel and the air filter kit. Close the engine bonnet.

Watch the video!


by ScegliAuto

More videos