Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. BMW
    3. :
  3. Serie 5
    4. : BMW 5 Series timing chain disassembly instructions

BMW Serie 5 - Video tutorial

Model: BMW Serie 5 F10, F11 - Years 2010-2017
Part: Timing belt
Operation: BMW 5 Series timing chain disassembly instructions

Today we will see how to disassemble and, therefore, replace the timing chain of a BMW 5 Series: we will mainly go to see the main steps. First of all we open and lift the engine hood: we remove the upper plastic protection of the engine and we go to remove the whole injection system, disconnecting any electrical connectors and removing the injectors. At this point we remove the cover to access the camshafts and therefore the timing chain; remove the main journals to remove the camshafts and then disassemble the timing chain.


Posted on 14 January 2024 by ScegliAuto

    Frequently Asked Questions

    • Serie 5 2003-2010 - How often should the timing chain of the BMW 5 Series be replaced? Read Answer
    • Serie 5 2003-2010 - What is the price for replacing the timing chain of the BMW N47? Read Answer
    • Serie 5 2010-2017 - How long does it take to replace the timing chain in the BMW 520d and how much does it cost? Read Answer
    • Serie 5 2010-2017 - Where is the timing chain of the BMW 520 f10? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos