Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. BMW
    3. :
  3. Serie 5
    4. : How to remove the injectors in 5 minutes

BMW Serie 5 - Video tutorial

Model: BMW Serie 5 E39 - Years 1995-2003
Part: Injectors
Operation: How to remove the injectors in 5 minutes

First of all, remove the small metal plate that secures the injector hook. Paying attention to the diesel fuel that could splash (in the meantime you work, always wipe up any spilled liquids with a cloth). Then you have to unhook the iron wire that fixes the injector, located in the upper part. It is attached to the four sides of the injector base. To make this easier, use a small split screwdriver. Do not lose the metal plates that you have removed, you will need them. Then remove the injector, where you can see its defect, ie the missing piece of plastic covering the metal bolt.


Posted on 24 July 2023 by ScegliAuto



Replacing the coolant sump gasket
BMW Serie 5 (1995-2003 / E39) Changing a gasket in itself is an easy operation, the difficult thing in this case is in reaching it. As you can see from the images, we start by rem
BMW 5 Series timing chain disassembly instructions
BMW Serie 5 (2010-2017 / F11, F10) Today we will see how to disassemble and, therefore, replace the timing chain of a BMW 5 Series: we will mainly go to see the main steps. First of al
Time adjustment on BMW 5 Series
BMW Serie 5 (2017-2024 / G30) Get in your car and turn on the ignition but not the engine (it shouldn't be necessary). Once the on-board computer is turned on, use the joystick on

Fiat Ducato 2.8 JTD gearbox oil replacement

Let's see in this guide the main steps to be able to change the transmission oil of the second series Fiat Ducato, with 2.8 JTD engine. First of all we lift the car and go to locate the gear oil vent bolt, which we find near the transmission; we use a hex wrench to unscrew it, letting it drain the old oil in a container for about ten minutes. At this point we open the bonnet and remove the air intake sleeve, so as to be able to access the gearbox oil filling hole; then we fill up to the maximum level!

Watch the video!


by ScegliAuto

More videos