Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Check Fuel Pump Operation

Model: BMW Serie 5 E39 - Years: 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003
Part: Pump

See other generations:
Video tutorial

If the engine fails to start, with an irregular rotation speed during this phase, it is possible that fuel is not reaching the engine properly due to an inefficiency of the pump, specifically the one submerged in the tank. A very quick and effective way to check the pump's operation is to intercept the bleed valve located on the side of the fuel rail for the injectors, loosen it slightly, and turn on the ignition: if fuel flows out regularly, then the pump is working and you need to look for the cause of the starting issue elsewhere.


Updated on 11 February 2026 by ScegliAuto


Related tutorials

How to Remove the Fuel Pump from the BMW 5 Series
How to Remove the Fuel Pump from the BMW 5 Series
BMW Serie 5 (2003-2010 / E60, E61) Today's main information will show you how to remove and replace the low-pressure fuel pump of the BMW 5 Series. First, open the rear doors and start…
How to Remove the Fuel Pump from a BMW 5 Series
How to Remove the Fuel Pump from a BMW 5 Series
BMW Serie 5 (1988-1995 / E34) How to remove the fuel pump from a BMW 5 Series? First, disconnect the battery cables. Then, remove the trunk mat. Use a socket wrench to remove the …
Removing the Fuel Pump on the BMW 5 Series E60
Removing the Fuel Pump on the BMW 5 Series E60
BMW Serie 5 (2003-2010 / E60, E61) Today, you will learn how to remove and replace the fuel pump or fuel sender on the BMW 5 Series E60 in simple steps. First, access the rear of the v…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos