Do it yourself
Frequently asked questions about cars and motorcycles

How to disassemble the fuel pump of the BMW 5 Series

Model: BMW Serie 5 E61, E60 - Years 2003-2010
Part: Fuel pump

Today's main information will show us how to disassemble and replace the low-pressure fuel pump of the BMW 5 Series. First, we open the rear doors and begin by removing the rear seat, pulling it upwards; then we unscrew the screws of the fuel pump cover, disconnecting the electrical wiring and fuel lines, as shown in the video. At this point, we unscrew the pump ring to remove it from the tank, carrying out the repair or replacement of the pump with the original one; we apply the reverse process for reassembly!

Posted on 21 July 2024 by ScegliAuto

Video tutorial

Related tutorials

BMW Serie 5 (1988-1995 / E34) How to remove the fuel pump from a BMW 5 Series? First, disconnect the battery cables. Then, remove the trunk mat. Use a socket wrench to remove the …
BMW Serie 5 (2003-2010 / E61, E60) Today, you will learn how to remove and replace the fuel pump or fuel sender on the BMW 5 Series E60 in simple steps. First, access the rear of the v…
BMW Serie 5 (1995-2003 / E39) In today's tutorial video, you will learn how to remove and replace the fuel pump of a BMW 5 Series 528i Gas. First, access the rear and remove the r…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos