Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Fuel Pump Replacement for BMW 5 Series 528i Gas

Model: BMW Serie 5 E39 - Years 1995-2003
Part: Fuel pump

In today's tutorial video, you will learn how to remove and replace the fuel pump of a BMW 5 Series 528i Gas. First, access the rear and remove the rear seat by pulling it upwards by hand. Then, remove the backrest and use a plastic lever to take off the upper cover of the pump. Once you reach this point, unscrew the screws and remove the pump cover; disconnect the electrical connector and remove the fuel line. Finally, unscrew the pump retaining ring to extract it (using the appropriate tool or a screwdriver and hammer), as shown in the video!

Updated on 9 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Removing the Fuel Pump on the BMW 5 Series E60
Removing the Fuel Pump on the BMW 5 Series E60
BMW Serie 5 (2003-2010 / E61, E60) Today, you will learn how to remove and replace the fuel pump or fuel sender on the BMW 5 Series E60 in simple steps. First, access the rear of the v…
How to disassemble the fuel pump of the BMW 5 Series
How to disassemble the fuel pump of the BMW 5 Series
BMW Serie 5 (2003-2010 / E61, E60) Today's main information will show us how to disassemble and replace the low-pressure fuel pump of the BMW 5 Series. First, we open the rear doors an…
Guide to Removing the Fuel Tank of the BMW 5 Series
Guide to Removing the Fuel Tank of the BMW 5 Series
BMW Serie 5 (2010-2017 / F11, F10) In this brief guide, you will find the main instructions to remove and replace the fuel tank of the BMW 5 Series. First, open the rear doors and star…

Other guides you may be interested in

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos