Do it yourself
| ||||
|
BMW Serie 3 - Video tutorial
Model: BMW Serie 3
E46
- Years 1998-2006 In this tutorial, we can see how to disassemble the injectors in the BMW 3 Series, useful in case we need to replace them or simply clean them. First of all, make sure the engine is cold, then open the hood and remove the cover by unscrewing the two bolts. Then, release the long glow plug power connector, release some of the internal pressure of the system by pressing the indicated valve, and remove the cross duct. At this point, we can grab the injector in question, gently pull it towards us, and proceed with its cleaning or replacement, depending on the needs.
Posted on 17 September 2023 by ScegliAuto
Other guides that may interest you
|
How to reset the tire pressure warning light on Dacia Sandero?Let's see below how it is possible to reset the low tire pressure signal on the car: first of all it is necessary to check the correct tire pressure by comparing it with the pressures reported in the use and maintenance manual. After that, turn on the ignition and locate the command on the right side of the steering wheel at the top that allows you to access the on-board computer menu, then select the car symbol, after which select the "up arrow" command up to that the indication "tire pressure" appears on the display. At that point, press the "Ok" control on the steering wheel and keep it pressed to reset the signal. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.021
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |