Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Injector Replacement BMW 3 Series E90

Model: BMW Serie 3 E92, E90, E91 - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: Fuel injectors

See other generations:
Video tutorial

In this video, you will see how to remove and replace the injectors on a BMW 3 Series E90 Diesel. First, open and lift the hood of the car, and use a wrench to remove the screws from the plastic covers located at the top of the engine bay. Then, remove the screws from the plastic engine cover and take it off. At this point, disconnect the various electrical connectors found above the cylinder head and remove the injector screws using a socket wrench.

Pull everything out and disconnect the electrical connector. Replace the injectors and reassemble everything.


Updated on 31 March 2026 by ScegliAuto


Related tutorials

How to Replace the Injectors on a BMW 3 Series?
How to Replace the Injectors on a BMW 3 Series?
BMW Serie 3 (2005-2013 / E92, E90, E91) To replace the injectors on a BMW 3 Series, open the hood to access the components inside the engine bay. Remove the plastic cover on top of the engi…
Replacing Timing Chain on BMW E90
Replacing Timing Chain on BMW E90
BMW Serie 3 (2005-2013 / E92, E90, E91) Let's see how to change the timing chain on your BMW E90 N46. It may seem a bit complex at first, but you just need to remove a few screws to access …
How to Clean the Injectors of a BMW Series 3
How to Clean the Injectors of a BMW Series 3
BMW Serie 3 (2005-2013 / E92, E90, E91) Let’s see how to clean the injectors of a BMW Series 3. Lift the hood and secure it with the prop rod, then disconnect the intake hose that supplies …

How to Reset the Tyre Light on a Toyota Aygo?

To reset the tyre light on a Toyota Aygo, start by locating the reset button, which is found in the glove compartment of the front passenger side. Turn on the car and ensure that the tyres are at the correct pressure. Then, press and hold the reset button for a few seconds until the tyre light either flashes or turns off, depending on the model. Release the button and wait for the reset procedure to complete. Restart your Toyota Aygo and check if the tyre light has turned off, indicating that the reset was successful.

Watch the video!


by ScegliAuto

More videos