Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing Timing Chain on BMW E90

Model: BMW Serie 3 E92, E90, E91 - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: Timing belt

See other generations:
Video tutorial

Let's see how to change the timing chain on your BMW E90 N46. It may seem a bit complex at first, but you just need to remove a few screws to access the timing chain. First, disconnect the injectors; remove the depressor to which the injectors are connected, and then remove all the screws located on the cylinder head cover.

This will allow you to take off the cover and finally access the chain. Disconnect the connectors located on the engine cover side; then loosen the two pulleys to remove them along with the timing chain.


Updated on 17 March 2026 by ScegliAuto


Related tutorials

Replacing the Timing Chain on the BMW 3 Series
Replacing the Timing Chain on the BMW 3 Series
BMW Serie 3 (2005-2013 / E92, E90, E91) Today, discover the steps to remove and replace the timing chain on the BMW 3 Series, following the instructions below. First, open the hood of your …
Guide to Replacing the Timing Chain on a BMW 3 Series 320D
Guide to Replacing the Timing Chain on a BMW 3 Series 320D
BMW Serie 3 (2005-2013 / E92, E90, E91) In this guide, you will find the main instructions to disassemble and replace the timing chain on a BMW 3 Series 320D, engine code N43. First, open t…
Replacing the Timing Chain on the BMW 3 Series
BMW Serie 3 (2012-2019 / F31, F30) This guide provides the main instructions to remove and replace the timing chain on the BMW 3 Series with the N47 engine. In this case, the timing ch…

How to Reset the Tyre Light on a Toyota Aygo?

To reset the tyre light on a Toyota Aygo, start by locating the reset button, which is found in the glove compartment of the front passenger side. Turn on the car and ensure that the tyres are at the correct pressure. Then, press and hold the reset button for a few seconds until the tyre light either flashes or turns off, depending on the model. Release the button and wait for the reset procedure to complete. Restart your Toyota Aygo and check if the tyre light has turned off, indicating that the reset was successful.

Watch the video!


by ScegliAuto

More videos