Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Timing Chain on the BMW 3 Series

Model: BMW Serie 3 E92, E90, E91 - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: Timing belt

See other generations:
Video tutorial

Today, discover the steps to remove and replace the timing chain on the BMW 3 Series, following the instructions below. First, open the hood of your car and start by removing the serpentine belt, loosening the tensioner; then remove the timing cover and take off the cylinder head cover, allowing you to subsequently remove the timing chain, as shown in the video.

At this point, install the original timing chain, ensuring the engine is timed correctly; finally, reassemble the cylinder head cover.


Updated on 17 July 2026 by ScegliAuto


Related tutorials

Replacing the Timing Chain on the BMW 3 Series Ti
Replacing the Timing Chain on the BMW 3 Series Ti
BMW Serie 3 (1998-2006 / E46) Today's instructions will show you the main steps to remove and replace the timing chain on the BMW 3 Series Ti gasoline model. First, you need to re…
Guide to Replacing the Timing Chain on a BMW 3 Series 320D
Guide to Replacing the Timing Chain on a BMW 3 Series 320D
BMW Serie 3 (2005-2013 / E92, E90, E91) In this guide, you will find the main instructions to disassemble and replace the timing chain on a BMW 3 Series 320D, engine code N43. First, open t…
Replacing the Timing Chain on a BMW 3 Series 2.0 328i
Replacing the Timing Chain on a BMW 3 Series 2.0 328i
BMW Serie 3 (2012-2019 / F31, F30) After reaching a certain mileage, it is necessary to replace the timing chain; let's go through the procedure on the BMW 3 Series 2.0 328i. First, op…

How to Open the Bonnet on the Mitsubishi L200?

In this tutorial, you will see how to open the bonnet on the Mitsubishi L200, a very simple operation that follows the standard procedure. First, open the vehicle and go to the driver's side, then locate the lever at the lower outer area, just in front of the pedals, and pull it. Next, position yourself in front of the bonnet, locate the second lever above the Mitsubishi logo, and push it to the right, releasing the latch. At this point, you can fully lift the bonnet and secure it with the prop rod.

Watch the video!


by ScegliAuto

More videos