Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Timing Chain on the BMW 3 Series

Model: BMW Serie 3 F31, F30 - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Timing belt

See other generations:
This video is currently unavailable

This guide provides the main instructions to remove and replace the timing chain on the BMW 3 Series with the N47 engine. In this case, the timing chain replacement procedure is performed with the engine removed; first, remove the engine block from the engine bay by disconnecting it from the transmission.

Next, remove the valve cover and take the necessary references for the timing chain replacement; remove the timing cover and replace the chain with a new one, following the video tutorial to the end!


Updated on 11 May 2026 by ScegliAuto


Related tutorials

Replacing the Timing Chain on the BMW 3 Series
Replacing the Timing Chain on the BMW 3 Series
BMW Serie 3 (2005-2013 / E92, E90, E91) Today, discover the steps to remove and replace the timing chain on the BMW 3 Series, following the instructions below. First, open the hood of your …
Replacing the Timing Chain on the BMW 3 Series Ti
Replacing the Timing Chain on the BMW 3 Series Ti
BMW Serie 3 (1998-2006 / E46) Today's instructions will show you the main steps to remove and replace the timing chain on the BMW 3 Series Ti gasoline model. First, you need to re…
Removing Timing Chain on BMW 3 Series 320i
Removing Timing Chain on BMW 3 Series 320i
BMW Serie 3 (2012-2019 / F31, F30) In this video tutorial, you will learn how to remove the timing chain from a BMW 3 Series E90 320i, gasoline model. First, open the hood and remove t…

Other guides you may be interested in

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos