Do it yourself
Frequently asked questions about cars and motorcycles

Removing Front Seats on BMW 5 Series E39

Model: BMW Serie 5 E39 - Years: 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003
Part: Seat

See other generations:
Video tutorial

Slide the seats forward as much as possible for better access. As shown in the video, remove the T50 Torx screw that secures the seat at the bottom, then detach the upper part of the seat "rails". Remove the bolt that secures the bracket of the aforementioned rails (repeat this on both sides of both seats).

Now slide the seats back to expose and remove the other bolt that secures the brackets, which should now be nearly free. Remove the small side clips and pull out the seat belts, disconnect the small battery located under the passenger seat, and you're done.


Updated on 8 April 2026 by ScegliAuto


Related tutorials

BMW Serie 5 (1995-2003 / E39) Follow these main instructions to remove and replace the front seat of the BMW 5 Series. First, open the front door and start unscrewing all the moun…
BMW Serie 5 (1995-2003 / E39) In this video tutorial, you will learn how to disassemble and replace the old, worn rubber door seal on the front door of a BMW 5 Series E39 by follo…
BMW Serie 5 (1995-2003 / E39) In this short and simple video, you will see how to remove the front license plate on the BMW 5 Series E39 by following the instructions below. First…

Fuses Placement and Diagram for the Mercedes Vito

Check the diagram and placement of the fuse boxes for the Mercedes Vito by following the instructions below. First, open the bonnet and locate the external fuse box; you will find it by removing the plastic cover situated at the top of the engine compartment, as shown in the video. At this point, find another fuse box in the cabin, specifically under the driver's seat; use the owner's manual to find the fuse diagram and replace any faulty fuse with a new one that has the same amperage rating.

Watch the video!


by ScegliAuto

More videos