|
Do it yourself
| |||
| ||||
How to Replace the Battery in the BMW 5 Series E60
Model: BMW Serie 5
E61, E60
- Years 2003-2010
The battery in the BMW 5 Series E60 is located in the trunk, above the right wheel well, behind a carpeted cover. There are plastic clips to remove. First, disconnect the negative cable (the black one) and move it away from the terminal; then disconnect the positive cable (the red one). At the bottom, there is a mounting bracket that secures it, with two 13mm bolts to completely remove. Be careful when removing: the battery is very heavy. Carefully position the new battery in the compartment, reattach the mounting bracket, and reconnect the cables in reverse order, first the positive and then the negative. Tighten the nuts securely but do not overtighten. Finally, reinstall the cover panel. On BMWs of this generation, the battery change must be registered with a diagnostic computer to inform the energy management system that the battery has been changed; otherwise, the alternator may not charge correctly, and the battery may have a shorter lifespan.
Posted on 23 September 2026 by ScegliAuto
Video tutorial
Related tutorials
BMW Serie 5
(2003-2010 /
E61, E60)
In this video, you will learn how to reset the service light on a BMW 5 Series E60/E61 (produced from 2003 to 2010). First, get in the car and ensure…
BMW Serie 5
(2003-2010 /
E61, E60)
If you need to replace the battery in the key of your BMW 5 Series e60, simply read the following procedure carefully and follow all the steps. First…
BMW Serie 5
(2003-2010 /
E61, E60)
Unlike many other car models, in the BMW 5 Series E60 (2003-2010), the fuse box is not located in the engine compartment or inside the cabin, but in …
Other guides you may be interested in
|
How to Connect the Cables to the Battery of the Citroen Xsara Picasso?
In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.108
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |