Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the battery of the BMW 5 Series E60 key

Model: BMW Serie 5 E61, E60 - Years 2003-2010
Part: Key

If you need to replace the battery in the key of your BMW 5 Series e60, simply read the following procedure carefully and follow all the steps. First of all, get a flat head screwdriver and then remove the emergency key from inside the protective cover and remove the cover with the help of the flat head screwdriver. Once the cover is removed, locate the exhausted battery and remove it using the screwdriver again. Finally, insert the new battery and reassemble the protective cover correctly.

Posted on 26 October 2024 by ScegliAuto

Video tutorial

Related tutorials

Where to Find the Fuse Box of the BMW 5 Series E60
Where to Find the Fuse Box of the BMW 5 Series E60
BMW Serie 5 (2003-2010 / E61, E60) Unlike many other car models, in the BMW 5 Series E60 (2003-2010), the fuse box is not located in the engine compartment or inside the cabin, but in …
How to Replace the Headlight Bulb on a BMW 5 Series E60
How to Replace the Headlight Bulb on a BMW 5 Series E60
BMW Serie 5 (2003-2010 / E61, E60) To correctly complete the replacement of the headlight bulb on your BMW 5 Series E60 (2003-2010), follow the steps outlined in this mini guide. First…
How to reset the service light on the BMW 5 Series E60
How to reset the service light on the BMW 5 Series E60
BMW Serie 5 (2003-2010 / E61, E60) It may happen that the yellow service light on your BMW 5 Series E60 stays on even after performing the regular service. In this case, the only solut…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos