Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the battery of the BMW 5 Series Hybrid.

Model: BMW Serie 5 G30 - Years: 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024
Part: Battery

See other generations:
Video tutorial

Today we will replace the battery of the BMW 5 Series model G30 Hybrid. The battery in these vehicles is located inside the trunk; to perform the replacement, we need to open the rear hood and remove the plastic cover by unscrewing the locking screws.

We remove the carpet to access the battery compartment. We connect the negative terminal connector and the positive terminal connector, unscrew the locking screw of the battery bracket to take it out of its seat.

We insert the new battery and connect the positive terminal connector and the negative terminal connector, secure the bracket nut, and reassemble the compartment cover. We reinstall the carpet and the plastic cover of the trunk.

We start the vehicle to ensure that the battery is functioning properly.


Posted on 9 January 2026 by ScegliAuto


Related tutorials

How to Replace the Key Battery for BMW 5 Series E60
How to Replace the Key Battery for BMW 5 Series E60
BMW Serie 5 (2003-2010 / E60, E61) If you need to replace the battery in your BMW 5 Series E60 key, carefully read the procedure described below and follow all the steps. First, get a …
How to Replace the Remote Battery for the BMW 5 Series?
How to Replace the Remote Battery for the BMW 5 Series?
BMW Serie 5 (2010-2017 / F11, F10) To replace the battery in the BMW 5 Series remote, press the button located on the top of the remote to fully extract the key inside the device. Afte…
How to Replace the Remote Battery for the BMW 5 Series?
How to Replace the Remote Battery for the BMW 5 Series?
BMW Serie 5 (2017-2024 / G30) In this tutorial, you will see how to replace the battery of the remote for the BMW 5 Series G30. For this simple and quick operation, you will need …

How to Reset the Tyre Light on a Toyota Aygo?

To reset the tyre light on a Toyota Aygo, start by locating the reset button, which is found in the glove compartment of the front passenger side. Turn on the car and ensure that the tyres are at the correct pressure. Then, press and hold the reset button for a few seconds until the tyre light either flashes or turns off, depending on the model. Release the button and wait for the reset procedure to complete. Restart your Toyota Aygo and check if the tyre light has turned off, indicating that the reset was successful.

Watch the video!


by ScegliAuto

More videos