Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Door Seal on a BMW 5 Series E39

Model: BMW Serie 5 E39 - Years: 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003

See other generations:
Video tutorial

In this video tutorial, you will learn how to disassemble and replace the old, worn rubber door seal on the front door of a BMW 5 Series E39 by following these simple steps. First, open the front door and start by disengaging the small plastic cover found at the bottom; then remove the old seal as shown in the video.

Next, clean the entire side area where the new seal will be inserted; finally, attach it correctly on the sides, ensuring a perfect seal of the front door!


Updated on 21 May 2026 by ScegliAuto


Related tutorials

How to Remove the Front License Plate on the BMW 5 Series E39
How to Remove the Front License Plate on the BMW 5 Series E39
BMW Serie 5 (1995-2003 / E39) In this short and simple video, you will see how to remove the front license plate on the BMW 5 Series E39 by following the instructions below. First…
Removing the Door Pillar Trim
Removing the Door Pillar Trim
BMW Serie 5 (1995-2003 / E39) To remove the trim from the driver side door pillar, first remove the inner seal where the window slides. Fully lower the window and pull out a secti…
How to Replace Door Panel on BMW E39
How to Replace Door Panel on BMW E39
BMW Serie 5 (1995-2003 / E39) Is the door panel damaged? Do you want to remove and replace it? Let's see how to replace it on a BMW 5 Series. Remove the screws located in the uppe…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos