Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Front License Plate on the BMW 5 Series E39

Model: BMW Serie 5 E39 - Years 1995-2003

In this short and simple video, you will see how to remove the front license plate on the BMW 5 Series E39 by following the instructions below. First, move to the front of the vehicle and start by removing the mounting screws or rivets to take off the license plate; use a screwdriver if there are screws or a drill bit to grind down and remove the rivets. At this point, unscrew any screws from the license plate holder or bracket; then, simply replace and reassemble everything by applying the reverse procedure of disassembly!

Updated on 28 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace Rear License Plate Lights with LED Lights
How to Replace Rear License Plate Lights with LED Lights
BMW Serie 5 (1995-2003 / E39) The process is actually very simple. Just use a flathead screwdriver to pry as shown in the video to disengage the entire light socket for the licens…
Installing LED License Plate Light
Installing LED License Plate Light
BMW Serie 5 (2003-2010 / E61, E60) To install the LED license plate light, remove the light holder integrated into the trim located just above the license plate, under the manufacturer…
How to Replace the Rear License Plate Lights on a BMW E60
How to Replace the Rear License Plate Lights on a BMW E60
BMW Serie 5 (2003-2010 / E61, E60) The lights located just above the rear license plate on your BMW 5 Series E60 are very important as they increase the visibility of the plate and hel…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos