Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Rear License Plate Lights on a BMW E60

Model: BMW Serie 5 E61, E60 - Years 2003-2010
Part: License plate light

The lights located just above the rear license plate on your BMW 5 Series E60 are very important as they increase the visibility of the plate and help you avoid potential fines. If one or more lights are not functioning correctly, you need to replace them. Here’s how to do it. First, make sure the car is off and the parking brake is engaged. Next, go to the rear hood, lift it slightly, and get a flathead screwdriver. Insert the screwdriver head into the narrow slot and push outward. Finally, remove the old bulb and replace it with a new one. Reposition the light correctly, and you're done.

Updated on 15 June 2026 by ScegliAuto

Video tutorial

Related tutorials

Installing LED License Plate Light
Installing LED License Plate Light
BMW Serie 5 (2003-2010 / E61, E60) To install the LED license plate light, remove the light holder integrated into the trim located just above the license plate, under the manufacturer…
How to Replace Rear License Plate Lights with LED Lights
How to Replace Rear License Plate Lights with LED Lights
BMW Serie 5 (1995-2003 / E39) The process is actually very simple. Just use a flathead screwdriver to pry as shown in the video to disengage the entire light socket for the licens…
How to Replace the Headlight Bulb on a BMW 5 Series E60
How to Replace the Headlight Bulb on a BMW 5 Series E60
BMW Serie 5 (2003-2010 / E61, E60) To correctly complete the replacement of the headlight bulb on your BMW 5 Series E60 (2003-2010), follow the steps outlined in this mini guide. First…

Other guides you may be interested in

How to Replace the Battery on a Honda Vision 110

To replace the battery on a Honda Vision 110, you need to remove the front fairing of the motorcycle, located directly under the front headlamp. To loosen this panel, unscrew the two screws found at its top, just below the handlebar. Once these screws are loosened, lever under the panel to detach it, gaining access to the battery underneath: this battery must be removed from its housing by unscrewing the fixing screws and disconnecting the power cables, replacing it with a new one.

Watch the video!


by ScegliAuto

More videos