Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Installing LED License Plate Light

Model: BMW Serie 5 E60, E61 - Years: 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010
Part: License plate light

See other generations:
Video tutorial

To install the LED license plate light, remove the light holder integrated into the trim located just above the license plate, under the manufacturer's emblem. Open the trunk and lift it enough to access the light holder for the license plate light.

Use a plastic pry tool to leverage the retaining tab and pull it out of its slot. Remove the original bulb, which is a wedge type, and insert the new one. Check that it lights up correctly and reposition the light holder in its slot.

Repeat the same process for the other license plate light.


Updated on 22 February 2026 by ScegliAuto


Related tutorials

How to Replace Rear License Plate Lights with LED Lights
How to Replace Rear License Plate Lights with LED Lights
BMW Serie 5 (1995-2003 / E39) The process is actually very simple. Just use a flathead screwdriver to pry as shown in the video to disengage the entire light socket for the licens…
Replacing Interior Lights with LED Bulbs
Replacing Interior Lights with LED Bulbs
BMW Serie 5 (2003-2010 / E60, E61) Start with the front dome light: use a plastic trim tool to detach the dome light, first the part with the buttons and then the part with the bulb ho…
Installing LED on the Rear Logo
Installing LED on the Rear Logo
BMW Serie 5 (1995-2003 / E39) This video shows how to mount the LED light behind the BMW logo. The operation is performed on a BMW 5 Series. In this case, the operation has alread…

How to Open the Fuel Filler Flap in the Hyundai i30?

In this tutorial, you will learn how to open the fuel filler flap in the Hyundai i30, a very simple operation that follows the typical procedure of most vehicles. First, unlock the locks using the designated button on the remote, then open the driver's door, locate the release lever on the left side of the seat, and operate it. Next, move to the fuel filler flap, open it completely, unscrew the cap, and refuel as needed. To close the flap, simply press it gently.

Watch the video!


by ScegliAuto

More videos