Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Chrome Door Panels

Model: BMW Serie 5 E39 - Years 1995-2003
Part: Body

Sometimes, even components deemed "non-essential" in a vehicle can break or become unsuitable for their intended purpose for any reason. Some people also work on their cars for tuning, modifying them in the process, but that is not what we are discussing now. In this guide, you will learn how to replace the chrome door panels on both sides: another simple and quick job. First, you need to remove the inner plastic panel of the vehicle so you can proceed to the next step: loosen the plastic clip by hand without necessarily removing it, on the left or right depending on which side you are working on. Then, preferably using the handle of a screwdriver, tap the first two clips to detach the first part of the panel; now, gently push up by hand to completely remove it. Done!

Updated on 9 February 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove Chrome Trim from Your Car Door
How to Remove Chrome Trim from Your Car Door
BMW Serie 5 (1995-2003 / E39) The following guide shows how to remove chrome inserts from your car door easily and quickly. For this operation, use a thick screwdriver, taking car…
Remove Chrome Trim from Your Car
Remove Chrome Trim from Your Car
BMW Serie 5 (1995-2003 / E39) This guide shows how to remove chrome trim from your car. Start by locating a corner to begin the removal. Carefully loosen it and use a flathead scr…
Installing LED on the Rear Logo
Installing LED on the Rear Logo
BMW Serie 5 (1995-2003 / E39) This video shows how to mount the LED light behind the BMW logo. The operation is performed on a BMW 5 Series. In this case, the operation has alread…

Timing Belt Replacement on Audi Q5

The timing belt on the Audi Q5 has reached its mileage limit, so what should you do? Let's go through the removal of the belts on the Q5. Open and lift the hood of the engine, then remove the engine soundproofing panel. Once these steps are completed, remove the plastic covers of the belts located on the left side of the engine. Loosen the second tensioner and slide the belt out of its seat. After installing the new belt, use a wrench to install the tensioner pulley, and tighten it until the belt has the correct tension (install both belts). Reinstall the covering plastics. Start and test the Audi Q5 engine.

Watch the video!


by ScegliAuto

More videos