Do it yourself
Frequently asked questions about cars and motorcycles

Removing the Door Panel

Model: BMW Serie 5 E39 - Years: 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003
Part: Door trim panel

See other generations:
Video tutorial

This video shows you how to remove the door panel. First, unscrew and remove the screw located behind the internal opening handle.

Then, gently pry off the faux wood plastic using a screwdriver. Using the same technique, take your screwdriver and repeat the process on all the outer sides of the door where clips are securing it. Once the panel is removed, be careful of the wires that remain connected; disconnect the connectors holding the wires, and you're done.


Updated on 10 February 2026 by ScegliAuto


Related tutorials

BMW Serie 5 (2010-2017 / F11, F10) How to remove and replace the door panel of a BMW 5 Series? Use a pry tool to remove the plastic trim above the door panel. Then, unscrew the fasteni…
BMW Serie 5 (2010-2017 / F11, F10) Today, let's go through the procedure for removing the rear door panel of the BMW 5 Series. First, open the rear door of the vehicle and start by rem…
BMW Serie 5 (2003-2010 / E60, E61) Follow these brief steps to remove and replace the front door panel of the BMW 5 Series. First, open the front door and start by removing the plastic…

Fuses Placement and Diagram for the Mercedes Vito

Check the diagram and placement of the fuse boxes for the Mercedes Vito by following the instructions below. First, open the bonnet and locate the external fuse box; you will find it by removing the plastic cover situated at the top of the engine compartment, as shown in the video. At this point, find another fuse box in the cabin, specifically under the driver's seat; use the owner's manual to find the fuse diagram and replace any faulty fuse with a new one that has the same amperage rating.

Watch the video!


by ScegliAuto

More videos