Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Disassembly of the front door panel of the BMW 5 Series

Model: BMW Serie 5 E61, E60 - Years 2003-2010
Part: Door trim panel

Through these brief steps, we will see how to dismantle and replace the front door panel of the BMW 5 Series. First, open the front door and start removing the plastic caps, unscrewing the screws found underneath; then also unscrew the screws located on the sides of the panel, as shown in the video. At this point, start detaching the door panel, disconnecting the electrical connector of the window button and the handle cable; this way it will be possible to access the internal parts of the door, subsequently reassembling the panel!

Posted on 20 May 2024 by ScegliAuto

Video tutorial

Related tutorials

Removing the Front Door Panel on BMW 5 Series F10 - F11
BMW Serie 5 (2010-2017 / F11, F10) In this video, see how to remove the front door panel on a BMW 5 Series F10 and F11 by following the instructions below. First, open the front door a…
How to Remove the Door Panel of the BMW 5 Series?
How to Remove the Door Panel of the BMW 5 Series?
BMW Serie 5 (2010-2017 / F11, F10) To remove the door panel of the BMW 5 Series, use a tool to pry off the trim located at the top of the panel. Once this trim is removed, you can unsc…
How to Remove and Replace the Door Panel of a BMW 5 Series
How to Remove and Replace the Door Panel of a BMW 5 Series
BMW Serie 5 (2010-2017 / F11, F10) How to remove and replace the door panel of a BMW 5 Series? Use a pry tool to remove the plastic trim above the door panel. Then, unscrew the fasteni…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos