Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Remove the Front Door Panel on BMW 5 Series

Model: BMW Serie 5 E61, E60 - Years 2003-2010
Part: Door trim panel

Remove the door panel if it is damaged or if you need to repair the door. Let's go through the panel removal process. Remove all the small screw covers located on top of the panel. Unscrew the screws on the door cover panel using a screwdriver. Disconnect the retaining clips. Run a plastic trim tool around the entire perimeter of the panel, then use your hands to pull the panel away and detach it from the door (disconnect the power harness and the opening cable). Perform the desired maintenance inside the door or replace it with a new one.

Updated on 19 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove and Replace the Door Panel of a BMW 5 Series
How to Remove and Replace the Door Panel of a BMW 5 Series
BMW Serie 5 (2010-2017 / F11, F10) How to remove and replace the door panel of a BMW 5 Series? Use a pry tool to remove the plastic trim above the door panel. Then, unscrew the fasteni…
Removing the Door Panel on BMW 5 Series
Removing the Door Panel on BMW 5 Series
BMW Serie 5 (2003-2010 / E61, E60) Remove the left front door of a BMW 5 Series to replace it with a new one. Disconnect the battery terminals located in the engine compartment. Using …
How to Remove the Door Panel on a BMW 5 Series
How to Remove the Door Panel on a BMW 5 Series
BMW Serie 5 (2010-2017 / F11, F10) How do you remove the rear door panel on a BMW 5 Series? Let's see how to proceed in this video. Before starting the disassembly, disconnect the batt…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos