Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Install Roof Railing Bars on a BMW 3 Series?

Model: BMW Serie 3 G20 - Years 2019-2026
Part: Roof rack bars

In this tutorial, you will see how to install roof railing bars on a BMW 3 Series, a very simple and quick operation. After obtaining the original bars from a BMW dealer, open the small covers found on the roof, under which the holes for installation are located. Next, adjust the bars to the correct length by loosening the screws located under the weatherstrip, insert them into the designated slots, and tighten the bolts using the included wrench. Once each bolt is tightened, tighten the adjustment screws until you hear a click.

Updated on 11 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Interior Roof Lining of the BMW 3 Series
How to Remove the Interior Roof Lining of the BMW 3 Series
BMW Serie 3 (2005-2013 / E91, E90, E92) In this brief guide, learn how to remove the roof lining or headliner of the BMW 3 Series by following these simple steps. First, get inside the vehi…
How to Remove the Roof Trim on the BMW 3 Series?
How to Remove the Roof Trim on the BMW 3 Series?
BMW Serie 3 (2005-2013 / E91, E90, E92) To remove the roof trim on the BMW 3 Series, disassemble all components inside the vehicle that prevent the headliner from being detached: these incl…
How to Remove the Soundproofing Panel of a BMW 3 Series Roof
How to Remove the Soundproofing Panel of a BMW 3 Series Roof
BMW Serie 3 (1998-2006 / E46) How do you remove the soundproofing panel of a BMW 3 Series roof? Let's see in this video how to proceed. Start by removing the side handles of the h…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos