Do it yourself
Frequently asked questions about cars and motorcycles

Door Removal and Disassembly Instructions

Model: BMW Serie 5 E39 - Years: 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003
Part: Body

See other generations:
Video tutorial

To completely remove the door, it is necessary to pull out the hinge pins, the rod pin, and especially disconnect the wiring harness connector. This is protected by a rubber cover with a plastic flange attached to the inner side of the door: once the pins are removed, you can open the door a bit more and more easily access the screws securing the flange.

After unscrewing the flange screws, you can remove the rubber cover and disconnect the wiring harness connector. At this point, you can detach the door from the pillar.


Updated on 11 February 2026 by ScegliAuto


Related tutorials

BMW Serie 5 (2003-2010 / E60, E61) Removing the door panel is very simple and requires the removal of only two screws: one is located under the plastic cap labeled SRS AIRBAG and the o…
BMW Serie 5 (1995-2003 / E39) Disassembling the door lock is not particularly complex but requires a lot of patience since you need to remove several components before completing …
BMW Serie 5 (2003-2010 / E60, E61) Today, let's go over the instructions to remove and replace the rear door panel of the BMW 5 Series. First, open the rear door of the vehicle and sta…

Fuses Placement and Diagram for the Mercedes Vito

Check the diagram and placement of the fuse boxes for the Mercedes Vito by following the instructions below. First, open the bonnet and locate the external fuse box; you will find it by removing the plastic cover situated at the top of the engine compartment, as shown in the video. At this point, find another fuse box in the cabin, specifically under the driver's seat; use the owner's manual to find the fuse diagram and replace any faulty fuse with a new one that has the same amperage rating.

Watch the video!


by ScegliAuto

More videos