Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Door Lock Disassembly Instructions

Model: BMW Serie 5 E39 - Years 1995-2003
Part: Handle

Disassembling the door lock is not particularly complex but requires a lot of patience since you need to remove several components before completing the disassembly. Start by removing the door panel, locating the fastening screws, and releasing the clips along the edges. Once the panel is removed, disconnect some connectors and take out the side airbag, then peel back the sound-absorbing cover. At this point, disconnect the release cable from the inner handle, detach the outer handle, and remove the corresponding bracket by disconnecting the cable. Finally, you can remove the lock's mounting pins and extract it after disconnecting the connector.

Updated on 15 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Central Locking Malfunction Issues
Central Locking Malfunction Issues
BMW Serie 5 (1995-2003 / E39) This video simply illustrates some of the problems that can arise when using the central locking system. In this specific case, as you can see from t…
Door Removal and Disassembly Instructions
Door Removal and Disassembly Instructions
BMW Serie 5 (1995-2003 / E39) To completely remove the door, it is necessary to pull out the hinge pins, the rod pin, and especially disconnect the wiring harness connector. This …
Repair the Central Locking System
Repair the Central Locking System
BMW Serie 5 (1995-2003 / E39) This video shows how to fix the malfunction of the central locking system on a BMW 5 Series. The problem, in this case, comes from the partial respon…

Other guides you may be interested in

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos