Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to disassemble the rear window of the BMW 5 Series

Model: BMW Serie 5 E39 - Years 1995-2003

Today we will discover the main instructions on how to disassemble and replace the rear windshield of the BMW 5 Series. First, we open the rear tailgate of the trunk and start removing the inner door panel; then we proceed to remove the rear windshield wiper arm, as shown in the video. At this point, we remove the lock button, then detach the rear windshield on the sides; finally, we install the new rear windshield, fixing it correctly, checking the seal, and reassembling all the other components.

Posted on 27 November 2024 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Rear Window of the BMW 5 Series E60
How to Replace the Rear Window of the BMW 5 Series E60
BMW Serie 5 (2003-2010 / E61, E60) Today, you will see the main steps to remove and replace the rear window of the BMW 5 Series E60. First, open the trunk and start by removing any int…
Replacement of the rear glass seal of the BMW 5 Series
Replacement of the rear glass seal of the BMW 5 Series
BMW Serie 5 (2003-2010 / E61, E60) Today we will see the necessary information to disassemble and replace the rear window seal of the BMW 5 Series. First of all, we open the rear hatch…
Replacing the Rear Window Seal on the BMW 5 Series
Replacing the Rear Window Seal on the BMW 5 Series
BMW Serie 5 (2003-2010 / E61, E60) In this video tutorial, you will see the steps to remove and replace the rear window seal on the BMW 5 Series. First, move to the back of the vehicle…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos