Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Rear Window of the BMW 5 Series E60

Model: BMW Serie 5 E61, E60 - Years 2003-2010
Part: Rear window

Today, you will see the main steps to remove and replace the rear window of the BMW 5 Series E60. First, open the trunk and start by removing any internal seal of the window; then use a very thin plastic pry tool and a cutting tool to remove and detach the glass from the sides, as shown in the video. At this point, carefully lift the rear window to remove it; then replace it with the new one, applying the sealant and the new seal on the sides!

Updated on 8 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Headlight Bulb on a BMW 5 Series E60
How to Replace the Headlight Bulb on a BMW 5 Series E60
BMW Serie 5 (2003-2010 / E61, E60) To correctly complete the replacement of the headlight bulb on your BMW 5 Series E60 (2003-2010), follow the steps outlined in this mini guide. First…
How to disassemble the rear window of the BMW 5 Series
How to disassemble the rear window of the BMW 5 Series
BMW Serie 5 (1995-2003 / E39) Today we will discover the main instructions on how to disassemble and replace the rear windshield of the BMW 5 Series. First, we open the rear tailg…
Where to Find the Fuse Box of the BMW 5 Series E60
Where to Find the Fuse Box of the BMW 5 Series E60
BMW Serie 5 (2003-2010 / E61, E60) Unlike many other car models, in the BMW 5 Series E60 (2003-2010), the fuse box is not located in the engine compartment or inside the cabin, but in …

How to Reset the Central Locking of the Volkswagen Golf 4?

If the central locking system of the Volkswagen Golf 4 is not working, it is likely necessary to reset the system: to do this, open the driver's door and detach the side panel of the dashboard next to the steering wheel. Under this panel, you will find the fuses, including the one for the central locking, which is indicated in the manual as number 14. To reset the system, remove this fuse from its housing, then reinsert it or replace it with a new one of the same amperage: this will reset the central locking system.

Watch the video!


by ScegliAuto

More videos