Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset and Calibrate Window Regulator System on BMW 5 Series E60 - 3 Series E90

Model: BMW Serie 5 E61, E60 - Years 2003-2010
Part: Warning light – error code

In this video tutorial, learn how to reset and recalibrate the window regulator system on a BMW 5 Series E60, 3 Series E90, and also on E87, E84, F10, and F30 models. First, get inside the car and make sure all the doors are closed; then turn on the ignition by pressing the button and press the button to fully open the window, holding it for about thirty seconds, as shown in the video. At this point, close the window and try to close and reopen it again; this way, your mechanism will be recalibrated and consequently reset!

Updated on 7 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Automatic Transmission Malfunction Warning on BMW 5 Series E60
How to Reset the Automatic Transmission Malfunction Warning on BMW 5 Series E60
BMW Serie 5 (2003-2010 / E61, E60) .. light on the BMW 5 Series E60, as well as the 3 Series E90. First, get in the vehicle and start by pressing the ignition button; then press and hold.. …
Where to Find the Fuse Box of the BMW 5 Series E60
Where to Find the Fuse Box of the BMW 5 Series E60
BMW Serie 5 (2003-2010 / E61, E60) Unlike many other car models, in the BMW 5 Series E60 (2003-2010), the fuse box is not located in the engine compartment or inside the cabin, but in …
How to Replace the Headlight Bulb on a BMW 5 Series E60
How to Replace the Headlight Bulb on a BMW 5 Series E60
BMW Serie 5 (2003-2010 / E61, E60) To correctly complete the replacement of the headlight bulb on your BMW 5 Series E60 (2003-2010), follow the steps outlined in this mini guide. First…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos