Do it yourself
| ||||
|
BMW Serie 5 - Video tutorial
Model: BMW Serie 5
E60, E61
- Years 2003-2010 In this video tutorial we will see the steps that will allow us to reset the automatic gearshift warning light on the BMW 5 Series E60, but also on the 3 Series E90. First of all we get on board the car and start by pressing the ignition button of the car; after which we press and hold the accelerator pedal for thirty seconds, in order to start the reset procedure. At this point we turn off and remove the key; then we turn it back on and press the brake pedal, as shown in the video; here in this way we will have correctly reset the warning of the automatic transmission!
Posted on 3 March 2024 by ScegliAuto
Other guides that may interest you
|
Frequently Asked QuestionsHow to reset the TPMS light of the Volkswagen Polo 2011The orange tire light indicates the presence of one or more tires with an inflation pressure below the recommended limit. All this is easily solved by inflating them correctly or replacing them in the event of a puncture. After carrying out these operations it is necessary to reset the warning light and therefore also the sensor in order to have new reading data. All you have to do is start the car ignition and then fully open the glove compartment on the passenger side. Locate the two buttons in the right corner and press "Set". At this point the reset is complete and you can turn off the ignition. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.045
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |